Products

Application of Kemai Jaw Crusher is one of the most popular stone crusher in the world, it is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa. feeding size could be 125mm～1020mm,It is widely used in mining, metallurgy, construction, highway, railroad, and chemistry industries and etc. Many models are available according to your different fineness requirements.

Compared with other crushers, the C series European jaw crusher has the advantages of advanced structure, relative less weight, reliable performance, high capacity and high crushing ratio, , as well as easy to install and convenient to operate. Separated structure simplifies the installation especially in the underground operation. The application of high speed crushing technology allows for the higher crushing ratio and higher capacity. Besides, the shock absorption system effectively protects the foundation from any damage.  

Kemai Impact crushers are used as both primary and secondary crushers in aggregate and in recycle crushing of reinforced concrete, asphalt and other construction materials. The materials crushed by impact crushers shall not be larger than 500mm and its anti pressure strength shall not exceed 350Mpa. The impact crushers are widely used in the industry of water and electricity, expressway, sand and stone, construction, sand production and etc.

Kemai LF impact crusher is an efficient crushing equipment, especially suitable for the treatment of construction waste and other hard materials. This equipment uses high-speed rotating rotor and plate hammer to achieve rapid crushing of materials through high-speed impact and repeated impact. Its design enables it to handle large materials, such as construction waste containing rebar heads, while maintaining high yield and productivity.

CS series cone crusher is based on the introduction and absorption of foreign technology, according to the needs of customers, based on the principle of laminated crushing and the concept of more breakage and less grinding design and development of high swing frequency, optimized cavity and reasonable stroke in one of the modern high-performance crusher.  The spring safety system is an overload protection device, which can make the metal foreign matter pass through the crushing chamber without harming the machine, and adopts the dry oil seal form to isolate the stone powder from the lubricating oil and ensure reliable work. It can be widely used in metal and non-metal mines, cement plants, construction, sand metallurgy and other industries. Non-ferrous ores, granite, limestone, quartzite, sandstone, pebbles, etc.

HPS series multi-cylinder hydraulic cone crusher is mainly composed of fixed cone part, moving cone part, eccentric sleeve part, transmission part, frame part, adjusting ring part, feed bin part, discharge port adjustment part, locking protection cylinder part, fan part, motor part, hydraulic station, lubrication station and special tools part.
Multi-cylinder hydraulic cone crusher is developed on the basis of the spring cone crusher, its basic structure is similar to the spring cone crusher. The difference between multi-cylinder hydraulic and spring cone crusher is that the original 10-16 sets of springs are replaced with 10-16 safety cylinders. It consists of a cylinder body, a piston, a support and a bolt. The cylinder is divided into two chambers A and B by a piston.
The working parts of the multi-cylinder cone crusher are composed of two truncated cones. It is in the active state. The over-iron protection device of the multi-cylinder hydraulic cone crusher is a plurality of hydraulic cylinders, and integrated with the locking protection device, which is installed in the upper and lower machine joints. The structure is more complex, the crushing effect of high hardness ore is good, and it is mostly used for the medium and fine crushing operation of ore and rock.

HS/HT series Single cylinder Hydraulic cone crusher has the characteristics of advanced structural design, excellent crushing capacity, excellent reliability and low production and operation cost. The hydraulic cone breaking realizes many functions such as adjustment of discharge port, cavity cleaning, over-iron and overload protection by lifting and moving cone of a single hydraulic cylinder. Equipped with electronic intelligent discharge port control system, more production process control and job optimization functions are realized. Single cylinder hydraulic cone crusher can be widely used in black, non-ferrous, non-metallic mines and sand and stone and other industrial fields

Kemai PCZ series heavy duty hammer crusher is one of the crushing equipment, the industry hammer crusher series of technology is more advanced a kind of equipment, the use of advanced production technology, to achieve a feeding molding, with high efficiency, energy saving and environmental protection characteristics. The finished material can be adjusted according to the demand, coarse, medium, fine, all kinds of specifications are complete; No sheet, no smooth body, multi-angle and multi-edge positive compressive strength. Especially suitable for highway, construction and large engineering materials. The crusher removes the initial breaking process of the E type machine, and becomes a new model for the completion of the crushing of large and small materials, with large output, high efficiency, small power, saving manpower and material resources, and reducing the crushing cost of materials. The stone broken by the machine is not only complete in specifications, but also uniform and clear, which is the replacement product of the old jaw breaking machine and the plate hammer breaking. This series of products is suitable for crushing all kinds of medium hardness and brittle materials. Such as limestone, coal and other materials. Mainly used in cement, mining, coal preparation, power generation, chemical and building materials industries.

K series mobile jaw crushing plant is a kind of latest rock crushing equipment, mainly used in metallurgy, chemical industry, building materials, hydropower and other often need to move the material processing, especially for highways, railways, hydropower projects and other mobile stone operations, users can use a variety of configuration according to the type of processing raw materials, scale and finished material requirements of different forms. Kemai K series mobile jaw crusher greatly expands the concept field of coarse crushing operation. Its design purpose is to stand in the customer's position, to eliminate the crushing site, the environment to the customer's crushing operation obstacles as the primary solution, and to provide customers with efficient and low-cost project operation hardware facilities.

S series mobile impact/ hammer crushing station adopts the latest manufacturing technology, selects high-quality high-chromium plate hammer, wear-resistant counterattack liner, and has a large crushing ratio. In addition, the high-quality characteristics of the finished product shape of the counterattack crusher itself make the mobile crushing unit equipment have a wider range of use. Mainly used in metallurgy, chemical industry, building materials and other often need to move the material processing, for highways, railways, hydropower projects and other mobile stone operations. Users can use a variety of configuration forms according to the type of raw materials, scale and finished material requirements. Tyre type impact breaking mobile crusher is especially suitable for small crushing site, suitable for construction waste treatment, construction waste crushing.

H series mobile cone crushing station is mainly used in the field of medium and fine crushing operation. In the sand and stone production operation, according to different stone quality and finished product use, the cone breaking mobile crushing station replaces the impact crusher to produce sand and stone products with higher hardness and finer granularity. Capacity, high efficiency, medium and fine strength crushing, strong adaptability, crushing and screening processing, self-loading conveyor. It is mainly composed of high efficiency cone crusher, high performance vibrating screen, belt machine, motor and control box. The configured cone crusher can be adjusted to different crushing chamber types according to actual needs, which expands the field and scope of use of the mobile cone crushing station. The whole unit is installed and coordinated, which fully reflects the advantages of convenience and flexibility. Cone crusher can be customized according to customer requirements, in strict accordance with the actual situation of the production site customized suitable cone crusher, vibrating screen, motor and other equipment, greatly improve production efficiency.

Kemai HS series multi-combination mobile crushing station is suitable for small and medium-sized stone factories, can independently complete customer production needs, low investment cost, can be tailored according to the actual situation of customers. Multi-combination mobile crushing station is a collection of feed, coarse crushing, fine crushing, screening in one, is the real sense of a machine is a stone production line. Considering the size of the frame and the convenience of movement, the multi-combination mobile crushing station is generally equipped with a smaller type of crushing equipment, so the output is low, suitable for small investment and quick return.